Complete List of Torque Wrenches

The Cedar DIW Torque Wrench is a lightweight digital torque wrench that tightens or loosens bolts up to 1040 lbf-in. The wrench head swivels 300 and can be used in tight places. You will get consistent readings no matter where or how the wrench is gripped because the torque sensor is centered on the drive and not up in the handle. Torque controlled wrenches can also be evaluated by comparative tests on a given fastener. Both breakaway and loosen tests can be performed. The Cedar DIW Digital Torque Wrench is rugged enough to be used in production.

Please click on the links below for additional information on the models available for this product:

The Checkline DAW Digital Adjustable Torque Wrench is designed for simple and precise measurements in industrial, automotive, aerospace, and many other applications. The DAW displays Real-Time and Peak torque on a large LCD display in ft-lb, in-lb,r N-m or kg-cm (user-selectable). The Checkline DAW Digital Adjustable Torque Wrench features rugged adjustable steel jaws and the ability to program 9 target setpoints. 12 bright LEDs and an audible alarm alert the operator when the applied torque approaches and reaches the desired target.

Please click on the links below for additional information on the models available for this product:

The Check-Line DTF Low Profile Digital Torque Wrench is designed for precise measurement and application of torque in industrial, automotive, aerospace and many other applications. Its low profile design and 1/4" female hex drive with ratcheting head are ideal for use in areas with limited access. It measures and applies torque in both CW and CCW directions and displays in Real-Time or Peak Mode. Measurement units are user selectable (Lb-in, N-m, ft-lb or Kg-cm). The Checkline DTF features 9 programmable target set points that indicates the desired torque value with a red and green LEDs and audible beep.

Please click on the links below for additional information on the models available for this product:

The Checkline DTW Electronic Torque Wrench is designed for simple and precise measurement of industrial, automotive, aerospace and many other applications. The DTW displays Real-Time and Peak torque on a large LCD display in ft-lb, in-lb or N-m, user selectable. The Checkline DTW features High-Lo set points that indicate a desired torque value with a bright LED and audible beep.

Please click on the links below for additional information on the models available for this product:

The Check-Line ETW advanced Torque Wrenchesis designed for high precision measurement of industrial, automotive, aerospace and many other applications. The Checkline ETW displays Real-Time and Peak torque on a large Color OLED screen in user selectable measuring units (lb-in, lb-ft, oz-in, N-m, cN-m, kgf-m, kfg-cm) . Users can program up to 99 target torque presets for fast and accurate torque application on repetetive tasks. The ETW provides visual and audible alerts as you approach and hit the target value.

Please click on the links below for additional information on the models available for this product:

The Checkline ETW-SPA is designed for precision torque and angle measurement. The large OLED display indicates real-time, peak torque and angle. 7 measuring units are operator selectable, (lb-in, lb-ft, oz-in, N-m, cN-m, kgf-m, kfg-cm). Users can program 99 preset torque targets for fast and accurate torque application on repetitive tasks. The Checkline ETW-SPA provides visual and audible alerts as you approach and hit the target value.

Please click on the links below for additional information on the models available for this product:

The Checkline GEK Digital Ratchetis a torque wrench that has a forged steel ratchet head and feature a unique power sensor in the ergonomic handle which accurately detects and analyzes load applied to the grip to enable more precise torque measurement regardless of hand position, unlike other loading point sensitive wrenches. Digital Adjustable Torque Wrenches expand torque applications to places where a socket wrench cannot work. They feature forged steel jaws and a unique power sensor in the handle which accurately detects and analyzes load applied to the grip, regardless of hand position and specially designed jaws that maintain a constant working length whether open or closed, to enable more precise torque measurement.

Please click on the links below for additional information on the models available for this product:

The Check-Line DTL Digital Torque Wrench is designed for simple and precise measurement of industrial, automotive, aerospace and many other applications. It measures both application or remove torque and displays it in either Real-Time or Peak Mode on a large LCD display in Lb-in, N-m, ft-lb or Kg-cm units (user selectable). The DTL features a programmabletarget set point that indicates the desired torque value with a red and green LEDs and audible beep.

Please click on the links below for additional information on the models available for this product:

The Gedore TBN Preset Break-Over Torque Wrench are robust production tools that reduce the chance of over-tightening, because of the unique Breaking Mechanism. They can be used for a wide range of applications, with a choice of compatible interchangeable end fittings. Their durable yet compact design makes them easy to use in restricted spaces in any manufacturing or maintenance environment.

Please click on the links below for additional information on the models available for this product:

The Imada RGED Wireless Digital Torque Wrench transmits peak data up to 130 feet to the included Torque Management software. A single wireless receiver supports up to ten wireless ratchet or adjustable torque wrenches. Wrenches store up to 200 data when out of range. When back in range, turn the power off then on to upload stored data to the software. Torque Management software keeps a log of all measurements which can be exported in CSV format.The Imada RGED Wireless Digital Torque Wrench are built with forged steel ratchet heads, positive-lock drives and a 36 tooth gear with double claw ratchets which allows smaller movements between clicks or forged steel heads and specially designed jaws that maintain consistent working length whether the jaws are open or closed. The unique power sensor in the ergonomic handle accurately detects and analyzes load applied to the grip to enable precise torque measurement.Imada RGED Wrenches measure in peak mode, peak with auto zero reset, and real time. Five programmable Go/No Go torque presets stored in memory enable users to check frequently used values. Presets alert the user with an intermittent signal at 90% and a continuous signal at 100% of preset torque using LED and audible indicators (Presets cannot be set at less than 10% of capacity). Selectable lbf-in, lbf-ft, kgf-m, and N-m units. Uses a lithium ion Panasonic CR123A battery. Wireless receiver, GED-Z is included.

Please click on the links below for additional information on the models available for this product:

The Mountz EPT Adjustable Click Wrench features an external adjustment torque scale, which allows an operator to quickly adjust the torque setting on the tool as needed for different applications. The cost effective click wrenches are durable and robust for a wide variety of industrial fastening applications. Our EPT adjustable click torque wrench is built with high quality materials to ensure low repair frequency and less repair costs. This adjustable click wrench is ideal for field service, maintenance or production environments.

Please click on the links below for additional information on the models available for this product:

The Mountz FGC Cam-Over Wrenches is next-generation cam-over wrench by Mountz Torque. When under- or over-torquing puts your products at risk, the FGC wrench delivers the accuracy you need. Safeguarding against fastening failures, the poka-yoke torque wrench prevents over-torque. Implementing this error-proofing wrench removes the operator's influence out of the torque equation and delivers an accurate and repeatable fastening result than a standard click type wrench. You can give Mountz FGC wrenches to any operator and have the confidence that he/she will deliver the correct torque, time after time. Mountz FGC tools stay in calibration 2X longer than the most stringent industry standard (ISO 6789).A click wrench is not a 100 % process safe and is often susceptible to over-torque results. A click wrench does not physically prevent an operator from applying additional force, he/she can unknowingly generate over-torque.

Please click on the links below for additional information on the models available for this product:

The Mountz Gedore ATB Adjustable Break-Over Torque Wrench suitable for a variety of applications across multiple industries from aviation maintenance to general repair tasks. The wrench has the ability to change head configurations like open end, box, flare or a ratchet head. At the set torque, the handle moves through an angle of 20 before resetting.

Please click on the links below for additional information on the models available for this product:

The Mountz Gedore DS Dial Torque Wrench is typically used as a quality control instrument to verify or monitor torque. However, some customers find them a resourceful production tool. In all cases, our dial wrenches are found to offer unmatched performance for several reasons. First, they are simple and easy to calibrate. Second, they incorporate an overload protection device to prevent over-torque and damage to parts or to the wrench. Third, our dial wrenches are non-length dependent, which means an operator can hold the wrench anywhere along the handle and the exact torque will be achieved. Lastly, the wrench offers a built-in ratchet mechanism.

Please click on the links below for additional information on the models available for this product:

The Mountz Gedore TSC Cam-Over Torque Wrench is a precision production tool designed to apply a set amount of torque. When the set torque is reached the unique cam action prevents over-torquing. This Torque Wrench was designed and manufactured to meet or exceed the accuracy and repeatability requirements of ISO 6789.2003 (+/- 6% of setting).

Please click on the links below for additional information on the models available for this product:

The Mountz Gedore TSN is a preset torque wrench that's ideal for maintenance and production applications where over-torque conditions are not tolerated. The use of cam-over wrenches takes the operator influence out of the torque equation and offers more accurate and repeatable results than a standard click type wrench.

Please click on the links below for additional information on the models available for this product:

The Mountz MTM Manual Torque Multipliers is a low cost solution that's ideal for wheel nuts and remote locations where air and electricity arent easily accessible. The gearing design allows for a high torque output with minimal input. Commonly used in petrochemical, power generation, transportation, shipping and maintenance industries.

Please click on the links below for additional information on the models available for this product:

The Mountz TBIH Break-Over Torque Wrench with Interchangeable Head is a small torque wrench ideal for applications with limited space. The flexible preset wrench can adapt to different fastening applications as it is compatible with different head options like open end, box end, flare end, hex key end or a ratchet head. The slim wrench features a tamper-proof internal adjustment. When the TBIH torque wrench achieves torque, the head breaks-over signaling to the operator to stop applying torque to the fastener or bolt. Break-over torque wrenches improve control of the fastening process by reducing the risk of both over and under tightening.

Please click on the links below for additional information on the models available for this product:

The Mountz TBIH-BH Box End Heads for TBIH Wrench is designed to work with TBIH preset break-over torque wrenches.

Please click on the links below for additional information on the models available for this product:

The Mountz TBIH-HK Hex Key Heads for TBIH Wrench is Designed to work with Mountz TBIH Break-Over Torque Wrench

Please click on the links below for additional information on the models available for this product:

The Mountz TBIH-OEH Open-End Heads for TBIH Wrench is Designed to work with Mountz TBIH Break-Over Torque Wrench

Please click on the links below for additional information on the models available for this product:

The Mountz TBX is engineered and assembled in Silicon Valley. The Mountz TBX line of precision preset break-over wrenches ensures consistent process and quality control by providing operators with a break-over wrench that helps you support your quality control inspectors by empowering your workers to prevent assembly errors. Torque range suitable for low to higher torque applications. Designed to tighten diverse fasteners accurately, break-over wrenches inform their operator when the right torque is reached by deflecting on their built-in hinge. As a result, you can reduce defective products and rework related to over- and under-torque conditions.

Please click on the links below for additional information on the models available for this product:

The Mountz TW-Series Manual Torque Multiplier is ideal for applications where air and electricity aren't easily accessible. The gearing design allows for a high torque output with minimal input. Commonly used in petrochemical, power generation, transportation, shipping, and maintenance industries.

Please click on the links below for additional information on the models available for this product:

The slip type "T" handle family of tools has become the worldwide standard for torque hand tools. Foolproof accurate torque control at a most reasonable cost has made the "T" handles indispensable in countless applications. That's why millions of this type of tool have been sold. All components for the slip type "T" family of tools are precision machined here at our Massachusetts facility on state of the art CNC equipment under strict a ISO 9001 certified quality system. These tools are always being re-engineered with design enhancements and superior materials to maintain their status as the finest torque tools available. These durable torque tools are pre-set at the factory to a specified torque value. Upon reaching the specified torque value, the tools automatically release and reset. This action prevents tightening above the pre-set value despite continued turning.

Please click on the links below for additional information on the models available for this product:

The Seekonk SK is designed for fool proof versatility in a convenient configuration. As with our other slip type tools, over torquing is impossible even with continued turning. The unmatched performance and endurance exhibited by these tools are made possible by internal components produced on state of the art CNC machining centers. The Seekonk SK Cam-Over Torque Wrench are pre-set at the factory to your requirements. Under normal use, yearly calibration is sufficient, however; routine calibration checks on a torque analyzer would be considered prudent. Standard accuracy +/- 4%.

Please click on the links below for additional information on the models available for this product:

The Seekonk SM-Series Adjustable Click Type Torque Wrenchis an adjustable Click Type Torque Wrench thatutilize a micrometer type adjustment mechanism to allow selection of torque value within the capacity of the tool. Twist locking action prevents accidental changing of torque settings.When selected torque value is achieved, a distinct click is felt and heard, followed by a sudden release through several degrees of free movement

Please click on the links below for additional information on the models available for this product:

The Seekonk TL-IT Inline Torque Limiter controls torquing through a cam-over clutch action. No chance for error because preset torquing action prevents overtightening, even with continued turning or differing tool lengths and adapters. For use with manual and non-impact power tools. Laser marked, color coded ID ring prevents confusion when multiple tools are used. Torques right or left, but is certified to +/- 4% accuracy in one direction only.

Please click on the links below for additional information on the models available for this product:

The Seekonk TS Series dial torque wrenche is designed for precision torque measurement and application. Built with chrome plated high alloy steel, TS series wrenches are rugged and durable. These tools feature a torsional bar system manufactured from a special molybdenum alloy steel that is electronically heat treated to exacting standards. Mated to these exclusive torsional elements are precision Swiss made dial indicators resulting in uncompromised accuracy, even after years of service. Seekonk TS Series dials are uncomplicated and simple to read thereby eliminating errors so common in other brands. Standard accuracy is +/- 3% of indicated value. Conforms to Federal Specification GGG-W-00686C. All tools are manufactured in the USA and are shipped with complementary NIST certs.

Please click on the links below for additional information on the models available for this product: